Effect of Copper-to-Aluminum Laser Welding Parameters on the Weld Formation and Microstructure Characteristics
Yan Wu1,2, Guofeng Sun1, Xuhui Liu1, Zhaoyang Li1, Shizhan Han1
1School of Mechanical Engineering, Shanghai Institute of Technology, Shanghai, China
2Shanghai Physical Gas Deposition (PVD) Super Hard Coating and Equipment Engineering Technology Research Center, Shanghai, China
Keywords: laser welding, 6061 aluminum alloy, oxygen-free copper (TU1), Cu/Cu/Al welding joint, weld, microstructure
Abstract
The feasibility of joining of the 6061 aluminum alloy to double-layer oxygen-free copper (TU1) by laser welding technology is reported. The weld formation and microstructure of the Cu-Cu-Al welding joint for various technological parameters are analyzed. The assessment of experimental results is based on macro- and microstructure observations of the weld using the AxioObserver D1M and Gemini SEM 300 scanning electron microscopes. The width and depth of the molten pool and the mechanical properties of the Cu-Cu-Al welding joint are tested by the Eagle-MD semi-automatic image measuring instrument and the YH-9002 computerized tension and compression machine. Among the nine tested samples, the most favorable weld parameters values are obtained with a laser power at 1600 W and a welding speed of 90 mm/s. The aluminum side area has a richer metallographic structure than the copper side area after welding.
|
