Home – Home – Jornals – Advanced Search

A model composed of silicate sand, crushed granite, and cement was subjected to biaxial compression, and the resulting deformations have been described. During the experiment lasting for several months, with a quasi-static level of applied stresses, water was repeatedly injected into the model. It has been established that when the volume of water injected into a zone of active fractures is small as compared with the volume of the model, the acoustic emission drastically increases. The shape of seismograms and curves of repeatedness of the acoustic signals recorded before and after water injection do not differ significantly, which implies that the effect is of trigger nature. The time succession of injection-caused acoustic events is qualitatively similar to the swarm and, in some case, aftershock activity of earthquakes. Hence, this factor may have an effect on seismicity. Different types of time succession of induced acoustic activity are described by an equation known from the kinetic theory of strength provided that the parameters of activation energy and working stresses depend on time.

Upper mantle anisotropy in Asia was investigated by inversion of Love and Rayleigh wave group velocity dispersion curves obtained by the FTAN procedure at periods between 10 and 150 s along paths that traverse Central Asia and Siberia. Our data were supplemented with data from the Center for Imaging the Earth's Interior (Boulder, Colorado), and 2500 to 4000 paths, depending on period, were used altogether. Locally averaged group velocity dispersion curves for Love and Rayleigh waves obtained by 2D seismic tomography for different periods were inverted to velocity-depth profiles, jointly and separately for SV (Rayleigh) and SH (Love) waves. SH waves have higher velocities than SV waves in the crust and upper mantle to a depth of ~300 km. The velocity profiles were used to estimate the mean anisotropy coefficient over depth intervals from the Moho to 100 km, from 100 to 200 km, and from 200 to 300 km. Anisotropy is the most prominent between 100 and 200 km, i.e., in the asthenosphere, and in anticorrelation with asthenospheric velocity: the lower the velocity the higher the anisotropy coefficient. Anisotropy is the greatest beneath active deforming regions of orogeny and vanishing in stable cratonic areas.

Several long-range profiles were shot with nuclear explosions within the Siberian Platform. The seismic records of both chemical- and nuclear-explosion profiles have revealed new peculiarities of the upper-mantle structure in the region. Seismic sections were constructed by ray tracing. To build the most informative starting model, the τ   (V,  x) method was applied, which implies construction of τ-time sections using the refraction and wide-angle reflection travel times for several velocity lines V = const. The modeling has revealed abnormally high (up to 8.4-8.5 km/s) upper-mantle velocities beneath the ancient Siberian Platform and low ones beneath the young West Siberian Plate. The upper mantle is shown to be of layered structure, with reflecting boundaries at depths of about 100, 150, 240, and 320 km. The boundary N1 at depths of 70-120 km is the most persistent; it often underlies low-velocity zones. The existence of velocity inversion zones and reflecting boundaries might be accounted for by fluid concentration at particular depths of the lithosphere, which suggests its rheological layering. The asthenosphere-lithosphere boundary has not been recognized in the velocity cross-sections.

A universal theory that accounts for the structure of fractured crust is suggested using data on strength and finite failure of rocks in high-pressure and high-temperature triaxial deformation tests. Correlation of the experimental results to the seismic cross section of the crust and mathematical modeling data indicates that the conditions at the Moho correspond to closure of the cracks network and annihilation of its hydraulic permeability. Therefore, upper mantle is rather dry than water-saturated, which means that the existing views of rock physics need a revision. Variations in crustal thickness are controlled by the trend of the geotherm and, besides, by olivine-to-serpentinite transition by the Hess reaction in oceanic crust. The Conrad discontinuity fits the horizontal foot of listric faults, waveguides (low-velocity zones) correspond to the cracked-porous inclusions and the lower crust to cataclastic state of rocks. The crust cut into fault-bounded blocks is modeled in the context of rotation tectonic waves that follow the sin-Gordon equation.

The variation principle was applied to the bifurcated deformation of an inelastic body to clear up under what conditions a regular system of shear and compaction bands can form. It has been established that a regular system of bands where plastic deformations are localized should form most likely in materials with a distinct yield point. Internal friction and dilatancy promoting the development of instability of the material in the regime of strain-hardening contribute much to this phenomenon.

Results of laboratory experiments and observation data on postseismic deformations in different regions were used to detect the regularities of formation of slow relative block displacements provoked by dynamic events. It is shown that under a gradual change of the stress-strain state of a rock massif, the asymptotic form of displacement with time is close to the law of a quasi-static flow, and under a drastic change in deformation rate, the relative block displacements are controlled mainly by the laws of friction force change during shear. The results obtained show that the dynamics of forces resisting to shears along block boundaries must be taken into account when constructing geomechanical models of different scales.

The paper presents an approach implying constructing continuum images of liquid- or gas-saturated porous and cracked solids. The hypothesis of classical continuum mechanics that closely positioned points of a solid occur in similar physical conditions breaks down in the case of porous media in which fluid and matrix material have strongly different properties. We suggest to represent a real microheterogeneous body by its continuum image using continuum operators, whereby the conservation laws are applied rather to the image than to its prototype.
The continuum image is described by the standard equation of motion and the respective real solid by infinite-order equations. The latter include velocities of elastic waves as well as infinitely low velocities of anomalies due to a great number of the degrees of freedom in microheterogeneous media consisting of separate elementary blocks.

We discuss a mechanism of nonhysteretic strain-amplitude dependent dissipation of elastic waves in microinhomogeneous media containing linearly dissipative and nonlinear elastic soft defects. The combined effect of these factors can cause well-pronounced essentially dissipative nonlinearity of elastic waves. The mechanism presumably works in rocks and other materials with microstructure where cracks and grain contacts act as soft inclusions. Unlike homogeneous materials where strain dependent variations of dissipation and elasticity are commonly of the same order, dissipation variations in microinhomogeneous materials can be times as great as the respective elasticity variations. A slight (a few percent) change in Young's modulus can correspond to a manifold dissipation change at moderate strain typical of acoustic and seismic applications. Moreover, in the case of variable frequency, this nonlinear mechanism can increase or decrease Young's modulus or reduce its variation to zero at certain frequencies while dissipation variations remain quite large. The nonhysteretic mechanism may act concurrently with hysteretic mechanisms, which are due to friction and adhesion effects and are commonly invoked for materials with microstructure, and influence the relationship between strain dependent dissipation and elasticity observed in experiments on nonlinear dissipative effects.

Impact tuffisites of the Popigai astrobleme are described. This class of rocks has first been discovered in terrestrial astroblemes. Their dikes in the target gneisses are made up of a mixture of glass (10-90 vol.%), gneiss fragments, and cryptograin matrix. Most of the glass particles are porous; they are

The dispersed organic matter of the Bazhenov Formation and Togur Member was correlated with the Bazhenov- and Togur-type oils in the southern Nyurol'ka megadepression, the Tomsk Region. On the basis of lithostratigraphic columns, data of testing and sampling of nineteen prospecting-exploratory boreholes, and vitrinite reflectance, the Mesozoic-Cenozoic sedimentary section was mathematically simulated in the form of a 3D-2D thermal model. According to the temperature zoning of oil and gas formation in the Bazhenov and Tyumen' Formations, loci of oil generation were established and the time of their joining the major zone of oil formation was determined. The locus of generation of the Bazhenov-type oils appeared at 32-24 Ma. In plan, it coincides with local folds in the Upper Jurassic sediments of the Igol'sk-Talovaya uplift, Karai-Aisaz trough, and northwestern Aisaz bank. The locus of generation of the Togur-type oils originated at 24 Ma and is associated with the Karai fold and local uplifts of the Karai-Aisaz trough. The possible effect of nonstationary deep heat flow, Pleistocene-Holocene cryogenic processes, and Miocene erosion on the forecast model for oil generation loci has been quantitatively estimated.