Publishing House SB RAS:

Publishing House SB RAS:

Address of the Publishing House SB RAS:
Morskoy pr. 2, 630090 Novosibirsk, Russia



Advanced Search

Combustion, Explosion and Shock Waves

2026 year, number 6

A XiFOAM-Based Numerical Investigation of Leakage-Induced Explosion Hazards in Lithium-Ion Battery Ships with a Focus on Multi-Point Ignition

Y.-C. Zhao1,2, Y.-B. Li1, A. A. Mohamed1, Z. Miao1, D.-H. Ai3, Q.-F. Wang4
1Navigation College, Dalian Maritime University, Dalian, China
2Dalian Key Laboratory of Safety & Security Technology for Autonomous Shipping, Dalian, China
3School of Construction Engineering, Shenzhen Polytechnic University, Shenzhen, China
4School of Mechanical-Electronic and Vehicle Engineering, Beijing University of Civil, Beijing, China
Keywords: XiFoam, lithium-ion battery, gas leakage and diffusion, explosion impact, more ignition points

Abstract

This study investigates fire and explosion hazards in lithium-ion battery ships using numerical simulations with the XiFoam solver in the OpenFOAM platform. The research focuses on the leakage and explosion of thermal runaway gases in the engine room of a hybrid energy vessel. Simulations show that obstructions significantly alter gas dispersion, causing high-concentration gas clouds to accumulate in specific compartments, especially near battery units. The analysis covers pressure distribution, shock wave propagation, and the effects of single versus multiple ignition sources. Results show that maximum explosion overpressure occurs in high-concentration gas regions, where rapid gas expansion creates a negative pressure zone. The pressure wave impinges on the bulkhead, reflects, and propagates semicircularly through passages into adjacent compartments. Higher gas concentrations result in greater explosion overpressure, with peak values observed near the batteries. Additionally, simulations with multiple ignition points were conducted. When ignition points are widely spaced, multiple annular low-pressure zones form. Closely spaced ignition points cause the low-pressure zones to merge into a single annular band. Under delayed multi-point ignition, a high-pressure zone forms between ignition points, significantly increasing local destructive effects.