Parameters of Continuous Detonation of Ammonia/Hydrogen-air mixtures in a radial vortex chamber
F. A. Bykovsky1, S. A. Zhdan1,2, E. F. Vedernikov1, A. N. Samsonov1
1Lavrentyev Institute of Hydrodynamics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia 2Kutateladze Institute of Thermal Physics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
Keywords: continuous spin detonation, continuous pulsating detonation, ammonia, hydrogen, air, transverse detonation waves, vortex radial combustion chamber
Abstract
Continuous spin detonation modes of carbon-free ammonia/hydrogen-air fuel-air mixtures have been implemented for the first time in a radial vortex combustion chamber with an outer diameter of 500 mm and an outlet diameter of 125 mm. Single-wave continuous spin detonation modes with a velocity of 1.57-2.33 km/s and a wave rotation frequency of 1.0-1.48 kHz at φ = 0.7-2.03 were achieved in ammonia/hydrogen-air mixtures with fuel of four compositions: NH3 + 8H2, NH3 + 4H2, NH3 + 3H2, and NH3 + 2H2. For the NH3 + 2H2 mixture, continuous pulsating detonation along the combustion chamber radius was also observed at a frequency of approximately 0.15 kHz with an excess fuel ratio of 1.11-1.18. For the NH3 + H2 mixture, conventional subsonic combustion was observed. The detonation velocity relative to the cylindrical surface of the combustion chamber was close to the ideal Chapman-Jouguet velocity. A complex structure of transverse detonation waves and a flow pattern in their vicinity were observed. The region of continuous spin detonation modes was determined depending on the ammonia content in the binary fuel and the pressure in the air manifold. Hot spots were detected in the flow region of the fresh mixture, influencing the formation of a detonation-capable layer.
|