Using a Highly Emissive Layer to Determine the Temperature of a Shock-Compressed Substance by the Pyrometric Method
A. S. Zolkin1, S. A. Bordzilovsky2, M. S. Voronin2,3, P. V. Geydt1, S. M. Karakhanov2, S. Yu. Chepkasov1
1Novosibirsk State University, Novosibirsk, Russia 2Lavrentyev Institute of Hydrodynamics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia 3Novosibirsk State Technical University, Novosibirsk, Russia
Keywords: shock wave, temperature, amorphous carbon film, pyrometry, emissivity, carbon film, absorption coefficient
Abstract
Experiments were conducted to measure the temperature of a shock-compressed transparent substance by introducing a thin film with high emissivity into the sample. On PMMA samples coated with a carbon film ≈0.3 µm thick, the temperature jumps to a value corresponding to the PMMA temperature in less than 100 ns. However, on quartz samples coated with a carbon film, rapid relaxation of the film temperature to the ambient temperature is not observed. It is hypothesized that this difference may be due to the different heating rates of the film in these cases, as it depends on the ratio of the thermal diffusivities of the film and the sample.
|