Publishing House SB RAS:

Publishing House SB RAS:

Address of the Publishing House SB RAS:
Morskoy pr. 2, 630090 Novosibirsk, Russia



Name:
Authors:
Keywords:
Abstract:
   

Russian Geology and Geophysics

2023

Number: 12

6631.
GEOCHEMISTRY AND MINERALOGY OF RARE-EARTH ELEMENTS IN FERRUGINOUS DEPOSITS AND BOTTOM SEDIMENTS OF THE LAPTEV SEA

O.N. Kolesnik, A.N. Kolesnik, A.S. Astakhov
a:2:{s:4:"TEXT";s:121:"V.I. Il’ichev Pacific Oceanological Institute, Far Eastern Branch of the Russian Academy of Sciences, Vladivostok, Russia";s:4:"TYPE";s:4:"text";}
Keywords: Ferruginous deposits, bottom sediments, rare-earth elements, river runoff, diagenesis, bioturbation, Laptev Sea

Abstract >>
The geochemical and mineralogical aspects of the distribution of rare-earth elements (REE) in ferruginous deposits (FD) and bottom sediments of the southeastern Laptev Sea are analyzed. The FD are dominated by biomorphs developed after polychaete tubes. The REE patterns depend on the proportion of ore and non-ore substances. The ore substance is represented mainly by iron hydroxides (limonite). It is a product of suboxic diagenesis enhanced by bioturbation and determines the slight enrichment of FD in MREE and cerium deficiency (Cean = 0.94). The non-ore substance comes from terrigenous sediments and has an (alumino)silicate composition. It controls the scandium content and is the source of REE mineral grains, among which monazite-(Ce) prevails. The sediments demonstrate a common similarity in REE patterns to shales and suspended material transported to the Laptev Sea by the Lena River, with elevated LREE and MREE contents and the value of Ce anomaly almost equal to unity (Cean = 1.06). In the sediments, REE minerals occur mostly in the silt fraction (<63 μm in size). The high content of organic matter (Corg of up to 2.15%) of predominantly terrigenous origin (OMter of up to 85%) in the sediments explains the oxygen deficiency and weak diagenetic mineral formation with low accumulation of trace elements, including REE, in the FD. The total REE content in the FD is lower than that in the sediments (on average, 173 ppm against 206 ppm).



Number: 12

6632.
DIFFERENTIATION OF THE BAZHENOV FORMATION BITUMOIDS IN THE NORTH-SURGUT REGION DURING GENERATION AND MIGRATION

I.S. Sotnich1, E.A. Kostyreva1, S.V. Rodyakin1, S.V. Ryzhkova1, A.E. Kontorovich1,2
1Trofimuk Institute of Petroleum Geology and Geophysics, Siberian Branch of the Russian Academy of Sciences, Novosibirsk, Russia
2Tyumen Industrial University, Tyumen, Russia
Keywords: Organic matter, bitumoid, naphtide, pore space, oil saturation, Bazhenov Formation, West Siberia

Abstract >>
The Bazhenov Formation of the Western Siberian oil-and-gas province is currently one of the key objects of potential growth in oil reserves and production. Here we present results of a geochemical study of the Bazhenov Formation according to the methodology developed at Trofimuk Institute of Petroleum Geology and Geophysics, Novosibirsk (IPGG SB RAS) for rocks highly enriched in organic matter. The features of the group and hydrocarbon compositions of the bitumoids that are filling open and closed pores of the Bazhenov Formation rocks from the North-Surgut region were considered. It has been established that most of the naphthides are in a free (phase-segregated) or sorbed state in a closed pore space. The open pores contain the most mobile components of bitumoids, redistributed from closed pores during the primary migration and remained after the secondary migration of naphtides from the Bazhenov Formation to the Berriasian-lower Aptian reservoirs (A and B strata groups). The methodology used in this work allows determining intervals with increased open porosity and oil saturation in the section of the Bazhenov Formation (silicites and carbonates) by the volume of pore space occupied by open-pore bitumoids.



Number: 12

6633.
VOLUMETRIC STRUCTURE OF THE BACHAT EARTHQUAKE (Kuzbass) AFTERSHOCK AREA AND STRESS STATE OF ROCK MASS UNDER OPEN-PIT MINE

A.A. Emanov1,2, A.F. Emanov1, E.V. Shevkunova1, A.V. Fateev1,2, Yu.L. Rebetsky3
1Altai-Sayan Branch of Geophysical Survey, Russian Academy of Sciences, Novosibirsk, Russia
2Trofimuk Institute of Petroleum Geology and Geophysics, Siberian Branch of the Russian Academy of Sciences, Novosibirsk, Russia
3Schmidt Institute of Physics of the Earth, Russian Academy of Sciences, Moscow, Russia
Keywords: Human-induced earthquakes, coal mining, induced seismicity, Kuzbass, the stressed state of rock mass, the Bachat earthquake

Abstract >>
The Bachat earthquake ( M = 6.1) with the epicenter coordinates of 54.29° N, 86.17° E occurred on June, 18 2013 near the Bachatsky coal strip mine, is the world’s largest earthquake induced while mining solid minerals. More than 5000 aftershocks were registered and the spatial volumetric structure of the aftershock area was investigated. The Bachat coal field is located in the Salair zone of the Kuznetsk Depression and is represented by a brachysynclinal fold of a very complex structure characterized by the damage and fracturing behaviors of rocks. The main event is confined to the coal-mine pit wall, with the greatest density of aftershocks observed in its middle portion. In the cross section, aftershocks form a wide area with its deepened portion shifted towards the Kuznetsk Depression, while large faults bounding the depression dip down under the Salair Ridge. In the exposed pit wall, at a depth of 4 km, the activated area resembles a rhombus whose horizontal diagonal line runs across the entire length of the mine pit and decreases both in upward and downward directions. The area is seismically activated to a depth of 6 km, with more intense activation of rock mass observed within the 1-3 km depth interval. Results of the study of the mechanisms of aftershock sources revealed a disagreement between the stress state of rock mass of the Bachatsky open-pit coal mine modeled from the mechanisms of aftershocks, and the mainshock mechanism of the Bachat earthquake.



Number: 12

6634.
USE OF DIGITAL ELEVATION MODELS IN METALLOGENIC INVESTIGATIONS ON THE EXAMPLE OF THE CENTRAL PART OF THE LOWER AMUR PROVINCE

a:2:{s:4:"TEXT";s:82:"G.Z. Gil’manova1, M.Yu. Nosyrev1, A.N. Didenko1,2";s:4:"TYPE";s:4:"html";}
1Yu.A. Kosygin Institute of Tectonics and Geophysics, Far Eastern Branch of the Russian Academy of Sciences, Khabarovsk, Russia
2Geological Institute, Russian Academy of Sciences, Moscow, Russia
Keywords: Digital elevation model, ring structure, gold deposits, metallogeny, Sikhote-Alin

Abstract >>
The digital elevation model (SRTM03) of the central part of the Lower Amur province is analyzed. The Limuri-Amgun ring structure is identified on the basis of a set of features, and it is also the location of the Pilda-Limuri and Kherpuchin-V’yunsky gold-ore regions, as well as the Albazino deposit, known for large industrial gold deposits and many small deposits and ore occurrences. The distribution of linear and ring elements of the relief is analyzed and geologically interpreted, and its spatial relationship with gold deposits and ore occurrences is shown. The relationship between the morphological severity of the ring structure and the deep structure of the region is shown. It is revealed that the structure is magmatic and characterized by a high concentration of intrusive bodies. According to the reference data on the age and composition of the igneous complexes of the region, the formation of the ring structure is associated with the processes of neoformation and transformation of the Earth’s crust and upper mantle during the end of the Late Cretaceous and the beginning of the Paleocene in a suprasubduction geodynamic setting.



Journal of Applied Mechanics and Technical Physics

2023

Number: 6

6635.
Cooling and Crystallization of Melt Droplets of Aluminum Alloys in Water Environment

M. V. Zharov
Moscow Aviation Institute (National Research University), Moscow, Russia
Keywords: granulation technologies, cooling, crystallization, crystallization temperature, rate of heat removal, microstructure dispersion, dendritic parameter, droplet method, centrifugation method, drop speed, vapor envelope, thermal conductivity, mathematical model

Abstract >>
The physical processes of crystallization of melt droplets in water have been studied using the droplet granulation and melt centrifugation methods. A mathematical model has been developed that makes it possible to determine the cooling and crystallization rates and dendritic structural parameter of aluminum alloy granules from the initial data of the process, the diameter of melt droplets, and cooling conditions. Predicting the dendritic parameter of the microstructure of granules allows one to predict the level of microstructure dispersion and hence the strength properties of the granulate material. The model parameters take into account the speed of droplet motion, features of heat removal processes, and the temperature dependence of the thermophysical parameters of the media. An application program implementing the developed mathematical model has been developed. Implementation of the developed mathematical model has been carried out using the Microsoft Visual C++ programming language. The mathematical model has been tested in the granulation of highly alloyed aluminum alloys (D1 and D16 alloys of the Al-Cu-Mg system, and B95 and B96Ts alloys of the Al-Zn-Mg-Cu system) obtained by centrifugal melt spraying and the droplet methods with cooling in water. Crystallization rate in full-scale samples has been measured based on an analysis of the dendritic structural parameter of the material. Analysis of the calculated values of the dendritic parameter and its measurements for real granule samples has shown that there is good agreement between the simulation and measurement results.



Number: 6

6636.
Influence of Substrate Preheating on the Structural and Phase Composition of a Nickel-Based Cermet Coating

M. A. Gulov1, I. E. Vitoshkin1, A. A. Filippov1, A. P. Zavyalov1,2, A. G. Malikov1
1Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
2Budker Institute of Nuclear Physics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
Keywords: laser cladding, direct laser growth, tungsten carbide, synchrotron radiation, metal ceramics

Abstract >>
The deposition of a nickel-based cermet coating containing 60 % tungsten carbide has been studied. The effect of substrate preheating up to 500 °С on the intensity of the in-situ synthesis of secondary ceramic particles obtained by dissolving the initial particles in a metallic matrix has been investigated. It has been shown that preheating contributes to the prevention of cracks and pores in the coating. Using synchrotron radiation, it has been found that additional heating of the sample during surfacing to a temperature of 500 °С does not cause significant changes in the phase composition of the resulting composite.



Number: 6

6637.
Effect of Substrate Preheating on the Cermet Coating Structure Obtained using Additive Technologies

I. S. Gertsel1,2, V. M. Fomin1, M. A. Gulov1, A. G. Malikov1, A. A. Filippov1
1Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
2Novosibirsk National Research State University, Novosibirsk, Russia
Keywords: Ti-6Al-4V alloy, substrate preheating, boron carbide, hardness, wear resistance, microstructure

Abstract >>
The influence of substrate preheating on the structure of a cermet-coating obtained by direct metal deposition from Ti64 alloy reinforced with B4C particles. Coatings containing 15 %. B4C were obtained for the first time. It has been shown that the use of substrate preheating makes it possible to produce cermet coatings without cracks. It has been found that in tribological tests, that the scratch volume of the cermet coating decreases by a factor of eight compared to the coating with the content of B4C 10 %.



Number: 6

6638.
Numerical Simulation of a Nanoparticle Collision with a Target by the Molecular Dynamics Method under the Conditions of Cold Gas-Dynamic Spraying

O. V. Belai1, S. P. Kiselev2, V. P. Kiselev2
1Institute of Automation and Electrometry, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
2Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
Keywords: nanoparticle, collision, target, molecular dynamics method, oxide film, cold gas-dynamic spraying

Abstract >>
Results on a nanoparticle collision with a target calculated by the molecular dynamics method are presented. The first problem being solved is a nanoparticle collision with a target under the conditions of cold gas-dynamic spraying. The second problem deals with nanoparticle extension, which adheres to the target due to the collision. It is shown that a chemical bond between the nanoparticle and target due to the collision. The bond in the case of titanium nanoparticle impingement onto an aluminum target is found to be stronger than that in the case of aluminum nanoparticle impingement onto a titanium target. The reason is that the titanium nanoparticle penetrates into the aluminum target to a greater depth.



Number: 6

6639.
Determination of Camouflage Explosion Parameters

B. A. Sednev1, S. L. Kopnyshev1, A. V. Sednev2
1State Fire Service Academy Academy of the State Fire-Fighting Service of EMERCOM of Russia, Moscow, Russia
2Bauman Moscow State Technical University (National Research University), Moscow, Russia
Keywords: pressure, safety, camouflage explosion, velocity field

Abstract >>
The centrally symmetric problem of determining the velocity field in a continuous elastoplastic medium under a camouflage explosion has been solved using the assumptions of the unoscillatory nature of the motion and the incompressibility of the medium in the regions of plasticity and elasticity. The solution was found using a camouflage equation-the relation for determining the pressure on the contact surface of an expanding explosion cavity. The solution allows one to estimate the dimensions of the expansion and plastic deformation regions and the impact of explosive disturbances on objects



Number: 6

6640.
Numerical Simulation of the Gas Dynamics of Nitrogen Jets Exhausting into a Rarefied Space

A. V. Zaitsev, L. V. Yarkov
Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
Keywords: numerical simulation, Direct Simulation Monte Carlo method, rarefied gas, jet flows, nonequilibrium flows

Abstract >>
A nitrogen jet expanding during its exhaustion from a nozzle into a vacuum chamber is numerically simulated by a hybrid approach. The flow parameters in the nozzle and in the near field of the jet are determined by solving the Navier-Stokes equations by using the ANSYS Fluent software. The gas flow at large distances from the nozzle exit is modeled by the Direct Simulation Monte Carlo method by using the SMILE software system. Such an approach makes it possible to perform sufficiently accurate simulations in the near field of the jet; moreover, the temperature nonequilibrium of the expanding gas jet and other effects of rarefaction in the far field of the jet are taken into account. The approach is verified by using various approximate analytical models of gas exhaustion into vacuum. A comparison of the numerical results with available experimental data shows that they are in good agreement.




Articles 6631 - 6640 of 31229
First | Prev. | 662 663 664 665 666 | Next | Last | All