Publishing House SB RAS:

Publishing House SB RAS:

Address of the Publishing House SB RAS:
Morskoy pr. 2, 630090 Novosibirsk, Russia



Name:
Authors:
Keywords:
Abstract:
   

Journal of Applied Mechanics and Technical Physics

2024

Number: 3

6071.
Specific Features of Flame Formation in a Collision of Two Hydrogen Jets

A. S. Tambovtsev, V. V. Kozlov, Yu. A. Litvinenko, M. V. Litvinenko, A. G. Shmakov
Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
Keywords: diffusion combustion of hydrogen, interaction of microjets, micronozzle

Abstract >>
Results of studying interaction of two colliding axisymmetric laminar microjets of hydrogen in the course of their diffusion combustion are reported. Gas exhaustion occurs with identical velocities through pairs of micronozzles, which are thin-walled cylindrical tubes with an inner diameter of 200   m. The transverse positions of the tubes with respect to each other are changed during the experiment. Specific features of flame formation from two interacting microjets are found for different transverse positions of the tubes, and the results are compared with flames of single microjets with the same exhaustion velocity.



Number: 3

6072.
Numerical Investigation on Characteristics of the Shock Wave Generated by an Annular Nested Charge

Li Junbao, Li Weibing, Wang Xiaoming
ZNDY of Ministerial Key Laboratory, Nanjing University of Science and Technology, Nanjing, China
Keywords: shock wave, composite charge, peak overpressure, impulse, test verification

Abstract >>
This study is aimed at understanding some characteristics of the shock wave generated by a novel composite charge consisting of an inner high explosive, a medium non-detonating layer, and an outer aluminized explosive. The influence of the shell restraints and initiation modes on the peak overpressure and impulse of the charge is investigated. Numerical models are developed based on the mapping function of AUTODYN for determining the spatial distribution of the shock wave overpressure. By means of validation experiments, the accuracy of the developed model is verified. It is found that the peak overpressure and impulse obtained from experiments and simulations are in good agreement, with a deviation of less than 16.9%. The difference in the overpressures at various azimuths decreases with increasing distance, and the shock wave profile eventually evolves into a spherical shape. The radial overpressure of the shelled composite charge is initially greater than that in the axial direction and decays rapidly with increasing distance. The azimuth corresponding to the maximum peak overpressure is shifted from 75oC for the bare charge to 110 °C for the shelled charge. It is found that the energy utilization of the composite charge under inner initiation is apparently smaller than that under simultaneous initiation.



Number: 3

6073.
Waves at the Interface with Countercurrent Flow of a Thin Film of Liquid and Turbulent Gas Flow in a Narrow Vertical Channel

O. Yu. Tsvelodub
Kutateladze Institute of Thermophysics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
Keywords: thin film of liquid, turbulent gas flow, evolution equation, periodic disturbances

Abstract >>
The countercurrent flow of a falling liquid film and a turbulent gas flow in a narrow vertical channel is considered. In the case of small Reynolds numbers and when certain conditions are met for the parameters of such a flow, the problem reduces to the study of one evolutionary integrodifferential equation for the deviation of the film thickness from the unperturbed level. A numerical study of the evolution of periodic disturbances has been carried out. Several solutions to the model equation are presented



Number: 3

6074.
Equilibrium Model of the Mixing Layer in Shear Flow of Stratified Fluid

V. Yu. Liapidevskii, A. A. Chesnokov
Lavrent'ev Institute of Hydrodynamics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
Keywords: mixing layer, internal hydraulic jumps, Boussinesq approximation

Abstract >>
A mathematical model is proposed that describes the formation of internal hydraulic jumps and the mixing of co-directed flows of an ideal stratified fluid in the Boussinesq approximation. The model is based on a three-layer representation of the flow taking into account the entrainment of fluid from the outer layers into the intermediate vortex layer and is represented as a system of heterogeneous conservation laws. The speed of entrainment is given by the equilibrium condition within the framework of a more general model of evolution of the mixing layer. The speed of propagation of disturbances and the concepts of subcritical and supercritical flows are formulated. It is shown that the model is suitable for describing the mixing and splitting of flow in deep-sea currents. Solutions corresponding to the flow around an obstacle with the formation of an internal hydraulic jump and a region of intense mixing were constructed. The results of numerical modeling were shown to be in good agreement with experimental data.



Number: 3

6075.
Vortex Structures in Supersonic Jets Exhausting into a Submerged Space

V. N. Zaikovskii1, V. P. Kiselev1, S. P. Kiselev1, O. V. Belai2, G. V. Trubacheev1
1Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
2Institute of Automation and Electrometry, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
Keywords: method of cold gas-dynamic spraying, slotted channel, supersonic jet, streamwise vortices, experiment, numerical simulation

Abstract >>
Results of studying gas flows in a setup used for cold gas-dynamic spraying are reported. The setup consists of a cylindrical inlet channel with a central rod connected at a right angle with a rectangular slotted channel. Injection of a high-pressure gas through the inlet channel leads to gas acceleration. It is shown that there are velocity and pressure disturbances in a supersonic overexpanded jet exhausting from the channel, which arise due to the presence of compression and expansion waves, as well as streamwise vortices. The contribution of streamwise vortices to pressure and velocity disturbances is approximately 30%. Streamwise vortices are formed at the entrance of the slotted channel owing to curvature of streamlines.



Number: 3

6076.
Application of the GBK-F Multifunctional Composition to Reduce the Residual Water Saturation of Oil Bed

V. I. Pen'kovskii1, N. K. Korsakova1, L. K. Altunina2, V. A. Kuvshinov2
1Lavrentyev Institute of Hydrodynamics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
2Institute of Petroleum Chemistry, Tomsk, Russia
Keywords: capillary blocking, terrigenous structure, experiment, oil-displacing compositions

Abstract >>
A method for controlling the physical and chemical properties of a formation in order to increase its oil recovery by injecting an acid composition GBK-F into the formation is being considered. An experimental setup has been created for physical modeling of the effect of the composition on an oil reservoir. Experiments were carried out on a flat model with a single injection of the reagent into the central well. The experimental results confirmed the effectiveness of the composition



Number: 3

6077.
Evolution of the Mathematical Model Characterizing the Thermal Field Developed in Submerged Arc Welding

J. Dutta
Department of Basic Science and Humanities, St. Thomas' College of Engineering and Technology, Kolkata, India
Keywords: integral transform, Duhamel's theorem, thermal field, submerged arc welding, EH36 steel

Abstract >>
A two-dimensional exact analytical solution of the thermal field developed during the submerged arc welding process with visualization of the thermal surface contour for analyzing the heat flow in the domain with the hybrid application of Duhamel's theorem and finite integral transform approach is obtained. The thermal field arising in submerged arc welding of thick EH36 steel plates is studied. An ellipsoidal heat source model is assumed. The developed thermal field is investigated with variations of several process parameters, such as the heat source velocity, heat input, and lag time of movement of the heat source involved in the welding process.



Number: 3

6078.
Heart Rate Effect on Blood Flow Hemodynamics in a Patient with a Thoracic Aortic Aneurysm: Numerical Study

A. Faraji1, M. Sahebi1, S. S. Dezfouli2
1Department of Mechanical Engineering, Qom University of Technology, Qom, Iran
2Department of Mechanical Engineering, Amirkabir University of Technology, Tehran, Iran
Keywords: thoracic aorta aneurysms (TAA), oscillatory shear index (OSI), wall shear stress (WSS), heart rate, CFD

Abstract >>
In this study, the effect of patient's physical activity in terms of the heart rate on the growth of the thoracic aortic aneurysm (TAA) is studied. Using medical images of the patient, a patient-specific geometry model is constructed. Then the hemodynamic parameters of the blood flow are numerically analyzed for different heart rate conditions. The simulation results show that the maximum wall shear stress, the maximum velocity, and the maximum pressure during a cardiac cycle increase by 19.1, 12.7, and 50%, respectively, as the heart rate increases from 60 to 174 beats per minute. Results also indicate that an increase in the heart rate leads to reduction of the time-averaged wall shear stress and simultaneously to an increase in the wall shear stress oscillations. According to the literature, these hemodynamic conditions are undesirable and can increase the likelihood of aneurysm development and aortic rupture.



Number: 3

6079.
Thermoviscoelastic Model of the Treatment of a Surface Layer with Variable Viscosity

A. G. Knyazeva
Institute of Strength Physics and Materials Science, Siberian Branch, Russian Academy of Sciences, Tomsk, Russia
Keywords: surface treatment, melting, chemical reaction, change in properties, viscoelastic stress

Abstract >>
The behavior of material under surface laser processing conditions is described taking melting into account. A Maxwellian type is presented that takes into account the change in heat capacity and viscosity with a change in temperature and material composition. This model is used as the bases to develop a model for the change in the properties of a flat layer material using a moving heat source. An algorithm for the numerical solution of the formulated problem is described. Examples are presented to show the effect of heat loss, cohesion, melting, chemical reactions and their acceleration due to the work of stress on the properties of the material



Number: 3

6080.
Effect of Compression Pressure on the Characteristics of Radiation Protective Composites

V. I. Pavlenko, D. S. Romanyuk, V. V. Kashibadze, O. V. Kuprieva
Belgorod State Technological University named after V.G. Shukhov, Belgorod, Russia
Keywords: protective composite, boron carbide B4C, mechanical characteristics, hot pressing

Abstract >>
The results of a study of the influence of compaction pressure on the characteristics of radiation-protective composites based on polyethylene and boron carbide B4C are presented. Using software modeling, the temperature range for heating a mold of a given size was selected. The required holding time of the composite was determined experimentally, and defects that arise from various deviations from the optimal temperature parameters were identified. The results of testing the strength of samples under various pressing pressure conditions are presented, and the optimal pressure value is found. A composite was obtained with the following mechanical characteristics under optimal pressing conditions: density (1.09 ± 0.01) g/cm3, bending strength (5.72 ± 0.18) MPa, sound velocity in the composite (2050.00 ± 0.01) m/s




Articles 6071 - 6080 of 31229
First | Prev. | 606 607 608 609 610 | Next | Last | All