Publishing House SB RAS:

Publishing House SB RAS:

Address of the Publishing House SB RAS:
Morskoy pr. 2, 630090 Novosibirsk, Russia



Name:
Authors:
Keywords:
Abstract:
   

Russian Geology and Geophysics

2024

Number: 7

6051.
ACTIVE TECTONIC DEFORMATION OF THE QILIAN SHAN, NORTHEASTERN TIBETAN PLATEAU

Z. Chen1,2, N.V. Koronovskii1, V.A. Zaitsev1, W. Xu2, E.A. Manuilova1,3, X. Liu2
1Lomonosov Moscow State University, Moscow, Russia
2School of Geosciences and Info-Physics, Central South University, Changsha, China
3Schmidt Institute of Physics of the Earth, Russian Academy of Sciences, Moscow, Russia
Keywords: Active tectonic deformation, seismicity, fault activity, GPS velocity field, Qilian Shan, Tibetan Plateau

Abstract >>
The Qilian Shan (or Qilian Mountains), located on the northeastern margin of the Tibetan Plateau, is an actively growing orogenic belt resulting from the far-field impact of the India-Eurasia collision. The northward penetration of the Indian Plate is responsible for intense crustal shortening in the Qilian Shan. However, the tectonic deformation pattern in response to the crustal shortening remains unclear. In this study, we present the regional seismicity, fault activity, and GPS crustal movement velocity field to characterize the active tectonic deformation of the Qilian Shan based on historical data over the past two decades. The results suggest that the western Qilian Shan is characterized by distributed north-south crustal shortening, while the eastern Qilian Shan is dominated by blocklike eastward extrusion of crust along major strike-slip faults coupled with clockwise rotation. North-south crustal shortening and east-west lateral extrusion, two deformation modes responding to the India-Eurasia convergence, match the crustal deformation in the Qilian Shan. The tectonic deformation of the western Qilian Shan is largely in agreement with the former, while the eastern Qilian Shan corresponds closely to the latter. Lower crustal flow beneath the central Tibetan Plateau provides the potential driving force to induce the eastward extrusion of crustal material out of the plateau and the growth of some boundary mountain ranges, such as the Qilian Shan.



Number: 7

6052.
ALTERATIONS OF HIGH-CARBON (shungite) ROCKS BY THE LAKE ONEGA WATERS: MINERALOGY AND GEOCHEMISTRY OF THE PROCESS

V.I. Malov1, V.D. Strakhovenko1, D.A. Subetto2, E.A. Ovdina1, M.S. Potakhin3, N.A. Belkina3, G.I. Malov1
1V.S. Sobolev Institute of Geology and Mineralogy, Siberian Branch of the Russian Academy of Sciences, Novosibirsk, Russia
2Herzen State Pedagogical University, St. Petersburg, Russia
3Northern Water Problems Institute of the Karelian Research Center, Russian Academy of Sciences, Petrozavodsk, Russia
Keywords: Shungite rocks, mineralogy, geochemistry, ferromanganese nodules, Lake Onega

Abstract >>
Carbonaceous (shungite) rocks have high contents of trace elements, which can get to the environment through natural weathering. Shungite rocks are a group of Precambrian carbonaceous rocks of volcanic and sedimentary genesis in Karelia. In this work we present results of studying the mineral and geochemical compositions of shungite rocks at their outcrops on the shoreline of Lake Onega. The interaction of the Onega waters with shungite rocks led to: (1) the removal of most elements, except for K, Mn, Ba, and Mg, whose contents in the rocks increased; (2) the formation of an assemblage of secondary minerals, such as hematite, jarosite, goethite, chalcocite, anglesite, brookite, and Mn hydroxides. Based on the results obtained, we propose a model of the transformation of high-carbon (shungite) rocks by the Onega waters.



Number: 7

6053.
BIOMARKER HYDROCARBONS AND CARBON ISOTOPES OF INDIVIDUAL N-ALKANES IN PARAFFIN OILS AND BITUMENS OF THE MIDDLE DEVONIAN-LOWER FRASNIAN TERRIGENOUS COMPLEX OF THE TIMAN-PECHORA BASIN

a:2:{s:4:"TEXT";s:108:"D.A. Bushnev1, A.A. Ilchenko1, L.V. Ogdanets2, N.S. Burdel’naya1";s:4:"TYPE";s:4:"html";}
1Institute of Geology, Komi Science Center, Ural Branch of the Russian Academy of Sciences, Syktyvkar, Russia
2Branch of Gazprom VNIIGAZ LLC, Ukhta, Russia
Keywords: Paraffin oil, bitumen, biomarker hydrocarbon, Middle Devonian-lower Frasnian petroliferous terrigenous complex, carbon isotope composition, Timan-Pechora basin

Abstract >>
The objects of study were bitumens of sedimentary rocks and paraffin oils of the Middle Devonian-lower Frasnian terrigenous complex of the Timan-Pechora basin. We studied the composition of biomarker hydrocarbons and the carbon isotope composition of individual n-alkanes of bitumens from the cores of the wells of the Omra-Lyzha saddle. The results were compared with similar data on the composition of paraffin oils from the south of the Pechora-Kozhva megaswell. The generation potential and thermal maturity of organic matter were studied by the Rock-Eval pyrolysis method. The maturity of organic matter in the rocks of the studied complex in the Omra-Lyzha saddle and the Pechora-Kozhva megaswell corresponds to the oil window. Data on the carbon isotopy of n-alkanes and on the composition of biomarker hydrocarbons do not contradict the possible genetic relationship between paraffin oils and the organic matter of the host sedimentary complex. Both the studied paraffin oils and the rock bitumens contain early eluting rearranged hopanes atypical of oils of other petroliferous complexes and show high contents of n-alkanes relative to iso-alkanes and polycyclic biomarkers. The content of 13C tends to decrease with an increase in the number of carbon atoms in the n-alkane molecule in both oils and bitumen rocks.



Number: 7

6054.
DEEP-LEARNING-BASED SIMULATION AND INVERSION OF TRANSIENT ELECTROMAGNETIC SOUNDING SIGNALS IN PERMAFROST MONITORING PROBLEM

O.V. Nechaev, K.N. Danilovskiy, I.V. Mikhaylov
Trofimuk Institute of Petroleum Geology and Geophysics, Siberian Branch of the Russian Academy of Sciences, Novosibirsk, Russia
Keywords: Permafrost monitoring, transient electromagnetic sounding, vector finite element method, Sumudu transform, express modeling, non-iterative inversion, deep learning, artificial neural networks

Abstract >>
This article presents a novel approach to addressing the challenges in permafrost monitoring through the integration of deep-learning techniques with conventional electromagnetic sounding methods. Our methodology comprises a forward finite element method (FEM) solver, augmented with the Sumudu transform, and an artificial neural network (ANN) solver trained on FEM-generated data. Remarkably, the ANN solver demonstrates similar accuracy to the FEM solver but operates at a superior speed that is nearly 10,000 times faster. Furthermore, we introduce an inverse problem solution drawing on the PARS algorithm. In addition, we present an ANN-based inverse solver, where the input and output roles are inverted. The ANN inverse solver is trained on the same data, thereby offering an alternative approach to solving the inverse problem. In a computational experiment, we compare the numerical inversion results using the PARS algorithm with those obtained from the ANN forward solver, ANN inversion, and a linear combination of these solutions. This comprehensive analysis sheds light on the effectiveness of our deep-learning-based approach in permafrost monitoring, providing insights for future applications in geophysics and environmental science.



Number: 7

6055.
INFLUENCE OF MAGNETIC POLARIZATION ON DIAGRAMS OF INDUCTIVE AND ELECTROMAGNETIC LOGS

E.I. Shtanko1, D.A. Arkhipov1, M.I. Epov1,2
1Trofimuk Institute of Petroleum Geology and Geophysics, Siberian Branch of the Russian Academy of Sciences, Novosibirsk, Russia
2Siberian Research Institute of Geology, Geophysics and Mineral Resources, Novosibirsk, Russia
Keywords: Finite Element Method, Helmholtz equation, magnetic polarization, induction logging, electromagnetic logging, clay formations

Abstract >>
We present the results of the study of the effect of induced magnetic polarization of clay beds under the influence of an external harmonic electromagnetic field (frequencies 70 and 875 kHz). A two-stage numerical modeling procedure is proposed. At the first stage we determine the effective relative magnetic permeability of a synthetic sample with inclusions of clay particles. In this case a 3D heterogeneous mesh sample is generated. Then we numerically model a spatial distribution of an electric field. The electromotive force (EMF) induced in the measuring coil is calculated from this distribution. Relative magnetic permeability is determined by comparison with EMF of homogeneous samples with different values of magnetic permeability. It has been found that during the electric field excitation by an alternating current coil, the effect of induced magnetic polarization appears in the sample with clay particles. Its manifestation is that the effective magnetic permeability becomes complex. At the second stage we calculate the EMF diagram of the three-coil logging probe in the macro-model ‘clay cap - reservoir’. Magnetic permeability of the clay cap is given by a complex value. In the generated logs, extremes appear in the vicinity of the bottom of the clay cap; they do not correspond to the distribution of electrical conductivity and magnetic permeability in the given model. They can be incorrectly interpreted when analyzing real logs into individual formations. Numerical modeling at all stages is performed by the Vector Finite Element Method on a consistent adaptive tetrahedral partition and the first-order Webb vector basis.



Number: 7

6056.
CHANGE IN NATURAL OSCILATON FREQUENCIES OF BUILDINGS AND STRUCTURES DEPENDING ON EXTERNAL FACTORS

V.S. Seleznev1, A.V. Liseikin1, I.V. Kokovkin1, V.M. Soloviev2
1Seismological Branch of Geophysical Survey of the Russian Academy of Sciences, Novosibirsk, Russia
2Altai-Sayan Branch of Geophysical Survey of the Russian Academy of Sciences, Novosibirsk, Russia
Keywords: Seismic monitoring, building monitoring, natural frequencies, remote monitoring, temperature influence, buildings and constructions

Abstract >>
This work is devoted to the development of the engineering seismic monitoring method created in Geophysical Survey of the Russian Academy of Sciences (GS RAS). In previous years, the “method of standing waves” was created and put into practice. It helps to separate natural oscillation modes of buildings and other engineering structures. The natural oscillations of hundreds of various objects (buildings, bridges, dams, etc.) had been studied and identified. We assumed that the physical condition of studied constructions could be controlled during exploitation by measuring the changes of natural oscillation frequencies. That would help to identify the appearance of defects in constructions, to prevent the risk of their destruction. However, it turned out that not everything is that simple: changes in frequency values are logically affected by changes in the environment around the studied objects. This article provides examples of these relations, influence of changes in environmental temperature, mass of objects and precipitation on the frequencies of natural oscillations.



Journal of Applied Mechanics and Technical Physics

2024

Number: 2

6057.
Calculation of Stress-Strain State of Binding Fiber Composites

S. I. Rakin
Siberian Transport University, Novosibirsk, Russia
Keywords: composite, reinforcing fibers, matrix, strength criterion, local stresses, averaged stresses, averaging method

Abstract >>
Based on the solution of the cellular problem of the theory of elasticity, an analysis of the main types of deformation of the binder cross-reinforced with fibers of the composite was carried out. It is shown that all previously predicted possible types of local deformation of the binder fiber composite are revealed in numerical solutions of the cell problem of the averaging theory. The local stress-strain state of the binder significantly depends on the cross-sectional shape of the fibers. In the case of fibers with a square cross-section, it is possible to estimate the stress-strain state using explicit formulas, while for fibers with sections of other shapes, a computer must be used to calculate the stress-strain state.



Number: 2

6058.
Justification of the Averaged Joule-Lenz Law for Composite Materials

I. V. Andrianov1, A. G. Kolpakov2, S. I. Rakin3
1Rhine-Westphalian Technical University, Aachen, Germany
2Novosibirsk State University Of Architecture And Civil Engineering (Sibstrin), Novosibirsk, Russia
3Siberian Transport University, Novosibirsk, Russia
Keywords: composite, averaging, heat release, Joule-Lenz law

Abstract >>
It has been found that the heat release in the homogenized composite model is described by Joule-Lenz law for the averaged current strength and voltage. It has been shown that the local electric field strength and the local electric current in a real composite are usually significantly different from those in the averaged model despite the fact that the electric field potentials in the averaged model and the real composite are close.



Thermophysics and Aeromechanics

2024

Number: 1

6059.
Features of the interaction of disturbances generated in the incoming flow with the leading edge of a straight wing

M.M. Katasonov1, V.V. Kozlov1, D.S. Sboev2, A.M. Sorokin1
1Khristianovich Institute of Theoretical and Applied Mechanics SB RAS, Novosibirsk, Russia
2Zhukovsky Central Aerohydrodynamic Institute, Zhukovsky, Russia
Keywords: boundary layer, streaky structures, wave packet, laminar-turbulent transition

Abstract >>
In a model experiment, the process of interaction of an external artificial disturbance with the leading edge of a straight wing model was investigated. The characteristics and features of the development of boundary layer disturbances, generated as a result of the interaction of external disturbances, and the blunted leading edge of the wing model have been obtained. The research was carried out in a subsonic low-turbulence wind tunnel using a hot-wire anemometry method for detecting disturbances. Localized disturbances generated in the incoming flow were shown to induce longitudinal streaky structures in the boundary layer of the straight wing. High-frequency wave packets (precursors) appeared at the boundaries (fronts) of longitudinal structures. The dynamics of the development of wave packets and localized longitudinal structures in the boundary layer above the wing profile in a gradient flow was studied.



Number: 1

6060.
Features of the cross-correlation characteristics of disturbances in the supersonic boundary layer of the plate at the influence of a pair of weak shock waves on the leading edge

L.V. Afanasev, A.A. Yatskikh, A.D. Kosinov, N.V. Semionov
Khristianovich Institute of Theoretical and Applied Mechanics SB RAS, Novosibirsk, Russia
Keywords: boundary layer, correlation measurements, square of the coherence function, the N-wave

Abstract >>
The results of experimental measurements are presented to assess the correlation characteristics of disturbances in the boundary layer of a flat plate with a sharp leading edge and pulsations of the incoming flow in cases of natural pulsations and influence of an N-wave for Mach 2 on the leading edge. The parameters of the cross-correlation of signals from two constant-temperature anemometry (CTA) are obtained digitally. The frequency ranges with apparent correlation between the mass flow rate pulsations measured by the probes are determined.




Articles 6051 - 6060 of 31229
First | Prev. | 604 605 606 607 608 | Next | Last | All