G.N. Kuvyrkin, D. R. Rakhimov
Bauman Moscow State Technical University, Moscow, Russia
Keywords: endochronic theory of plasticity, thermoplasticity, non-isothermal loading, complex loading, deformation curve
It is proposed to use the relations of the endochronic theory of thermoplasticity to describe the nonlinear deformation of isotropic materials under non-isothermal loading. A variant of the governing relations in integral and differential form for the general loading case is given. Analytical dependences for a number of material parameters of the model were determined based on the results of uniaxial tension (torsion) tests. A numerical algorithm based on the Euler method with an internal iterative process implemented by the Seidel method is proposed to analyze the governing relations. An example of numerical calculation of the uniaxial tension of a rod under complex thermal force loading. It is shown that the calculation results are in satisfactory agreement with the results obtained using isotropic hardening flow theory
A. G. Gorynin1, G. L. Gorynin2, S. K. Golushko1,3 1Novosibirsk State University, Novosibirsk, Russia 2Surgut State University, Surgut, Russia 3Federal Research Center for Information and Computational Technologies, Novosibirsk, Russia
Keywords: thin-walled rods, constrained torsion, asymptotic splitting method, stress-strain state, warping, bimoment, Vlasov theory
The problem of constrained torsion of thin-walled rods under the action of an end torque is considered. Using the asymptotic splitting method, a system of resolving equations was obtained that describes the combined torsion, tension-compression, and bending of the rod. To test the resulting model using the example of typical sections, a comparison was made of the stress-strain state in the rod, determined in the calculation using the developed model and three-dimensional numerical calculation by the finite element method. The resulting mathematical model was analyzed and its advantages compared to the widely used Vlasov theory were revealed. It is shown that the developed model does not contain the restrictions imposed by the hypotheses in the Vlasov theory, such as the non-deformability of the transverse contour and the absence of shear deformations on the middle surface. In a number of cases, the resulting model makes it possible to more accurately determine the emerging stress-strain state. In particular, it is shown that the developed model takes into account the presence of a boundary layer near the embedment, which arises during torsion of corner sections and makes a significant contribution to longitudinal stresses, while Vlasov’s theory does not allow one to restore the arising longitudinal stresses
A. E. Buzyurkin, A. E. Kraus, E. I. Kraus, I. I. Shabalin
Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
Keywords: dynamic yield strength, heterogeneous material, impact, fracture
A method of determining the dynamic yield strength of heterogeneous materials is proposed, based on comparisons of the processes of cavity formation in the reference and examined materials. A series of computations is performed for penetration of an extended rod into homogeneous and heterogeneous massive targets. A nonmonotonic dependence of the penetration depth on the motion velocity is derived. The yield strength limit of a heterogeneous medium is obtained from the analysis of computation results in the coordinates of the specific kinetic energy of the rod and the work of stresses on plastic strains.
A. V. Vasyukov, I. B. Petrov
Moscow Institute of Physics and Technology, Dolgoprudny, Russia
Keywords: grid-characteristic method, unstructured mesh, extended template, dynamic problem, anisotropic elasticity
Using the grid-characteristic numerical method on grids of tetrahedrons, wave processes in a composite material are simulated under the action of a pulsed shock load. An approach is proposed to increase the order of approximation of the method on an unstructured mesh in the three-dimensional case. The results of calculations of the propagation of a load impulse in a three-layer composite are presented
S. I. Senashov, I. L. Savost'yanova, A. Yu. Vlasov
Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russia
Keywords: elastic torsion, multilayer rod, exact solution, conservation laws
A two-layer rod with a box section twisted under the action of tangential stresses at angle θ is considered. It is assumed that the deformations in the rod are elastic and its lateral surface is stress-free. The layers have different elastic properties and different thicknesses. The layer contact line is assumed to be rigid, i.e., the stresses on it coincide. An exact solution describing the stress state of the given structure is constructed using conservation laws. The stress state is determined at each point of the cross section using integrals over external contours
A. V. Petyukov, A. I. Bobrova, I. R. Grishin, D. A. Ivanov, M. Yu. Sotskii
Bauman Moscow State Technical University, Moscow, Russia
Keywords: fabric target, numerical methods, limit penetration speed, ballistic resistance, mesomodeling
A simplified numerical method for simulating the penetration of projectiles into fabric targets is proposed which takes into account the type of fabric weaving, the friction forces between the fibers and between the projectile and the fabric, and the transverse dimensions of the fabric. The necessary calculated parameters were selected from a comparison of experimental and calculated data. The proposed method was used to estimate the ballistic resistance of a combined protective composition required to reduce the armor impact. The problem of the nfluence of the projectile shape on the ballistic resistance of fabric armor protection
A. Yu. Larichkin, D. V. Tikhvinskii, D. V. Parshin
Lavrent'ev Institute of Hydrodynamics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
Keywords: snow, ski sliding, friction, experiment
A brief overview of experimental approaches to the study of the tribology of sliding of various bodies on snow or ice is presented, and a model and a digital twin of a tribological device is proposed. The deformation distribution of a tank with snow rotating at a target speed was obtained by modeling, and the work done by the friction force per sliding cycle was determined by testing the movement of a ski sample on a flat snow surface. The proposed device can be used to evaluate the efficiency of sliding on snow at a given temperature, snow structure, humidity, and the roughness of the ski surface sliding on snow
S. S. Simakov1,2,3 1Marchuk Institute of Computational Mathematics, Russian Academy of Sciences, Moscow, Russia 2Moscow Institute of Physics and Technology, Dolgoprudny, Russia 3Sechenov First Moscow State Medical University (Sechenov University), Moscow, Russia
Keywords: hyperbolic equations, conservation laws, coronary blood flow, hemodynamic indices, fractional blood flow reserve
This paper presents an analysis of the effectiveness of using one-dimensional network models for virtual assessment of hemodynamic indices whose values are widely used in clinical practice to choose a treatment strategy for coronary heart disease with stenotic lesions of the coronary arteries. It is shown that existing approaches make it is possible to assess hemodynamic indices based on clinical data collected without intervention in the body with an accuracy comparable to the accuracy of the input data and direct measurements. It is also important to take into account the state of the myocardium microvasculature and its influence on the interpretation of modeling results and direct measurements in the clinic
Ya. V. Fedotova1, E. V. Amelina1, R. I. Mullyadzhanov2, A. A. Karpenko3 1Novosibirsk State University, Novosibirsk, Russia 2Kutateladze Institute of Thermophysics, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia 3Meshalkin National Medical Research Center, Novosibirsk, Russia
Keywords: shaggy aorta, three-dimensional morphology analysis, central line, local basis with parallel transfer, ideal surface, thromboembolic complications
An approach is proposed for quantitative assessment of the shagginess of the lumen of a pathologically altered aorta, taking into account the three-dimensional morphology of its internal surface. An algorithm for assessing local shagginess has been developed and implemented, and an integral criterion for shaggyness in the anatomical region has been proposed. The algorithm was tested on data from two patients with a shaggy and a smooth lumen. The results obtained are in good agreement with the results of visual assessment by expert surgeons and are confirmed by clinical outcomes during surgery
I. Rezaei, A. Sadeghi
Renewable Energy Research Center, Damavand Branch, Islamic Azad University, Damavand, Iran
Keywords: Salmonella typhimurium and Listeria monocytogenes bacteria, mechanical properties, resonant frequency, atomic force microscopy
Salmonella typhimurium and Listeria monocytogenes bacteria, which are two important bacteria used for bacterial therapy purposes in order to limit tumor growth, are studied. Mechanical specifications of the bacteria obtained applying nanoindentation with the use of atomic force microscopy (AFM) are reported. The results show that Salmonella typhimurium bacteria have a greater elastic modulus, but smaller adhesion than Listeria monocytogenes bacteria. The elastic modulus of the AFM extension stroke is larger than that of the retraction stroke. The resonant frequencies and amplitudes of the frequency response function of the AFM beam's vertical movements with two bacteria as samples are investigated using the finite element method. The results show that an increase in the elastic modulus of the sample raises the resonant frequency; therefore, the resonant frequency of Salmonella typhimurium bacteria is greater than that of Listeria monocytogenes bacteria. The results obtained by the finite element method and experimental techniques are found to be in good agreement.